Blount (is or was, not sure if they sold) owns both Hydro AX and Prentice as well as a bunch of other logging equipment manufacturers. RMS has been a distributor for many years. Pump was sent out to an independent hydro shop that claimed they had a good housing and would swap out the good new parts ($8,000) and bench test pump for $10,000 (could have got a cat remand for $17,000 in the beginning).
After the pump was put in the cat tech came out and set all the pressures and machine ran fine for about 80 Hrs. (8 months). Cat 330cl hydro pump failure I need help - Heavy Equipment Forums Also the cat tech said that they where separate hydro pumps for the tracks and the boom, Do you guys know where this relief valve is located on the machine?? Thanks Chuck Hydro Boost Thank you for responding ATCO!Yes it's better defined as a firm -hard pedal.The electric pump works when you first start the motor.The brakes are all good & no leaks in brake cyls.
7 hydro tablets, Had our local hydro vac crew come and clean one out just to see how it worked and I was sold. 2 huge advantages are 1) so much cleaner, way less clean up after the repair. Huge time savings there. They suck out the mud and haul it off, we bring in clean dirt after the repair has been made. I've had a couple that a piece of debris punctured the bottom of the plastic hydro tank through a hole in the belly pan.
7 hydro tablets, I think the hole is for a drain since there is two parts via a hump in the tank. 2005 bobcat t190 705 hours, low hydrostatic pressure code 05-09 and extremely low code 05-14, 05-15 followed by engine shut down. only does it at idle which is 1150 rpm. quits doing it at 1300 rpm. I changed all filters and line filters and changed hydro fluid.... also brake and traction lock...
